High-country-tek Plug Top Driver Series Manual do Utilizador descarregar pdf (Página 2)

Electronic Controller Solutions for the Fluid Power Industry

Voltage Command Connection Details:

Current Command Connection Details:

+V Supply

0VDC

10K

Potentiometer

BLUE

GREEN

YELLOW

RED

+VRef

+V Supply

0VDC

+I-I

BLUE

GREEN

YELLOW

RED

xternal Signal

4-20mA

0VDC

BLUE

GREENYELLOW

RED

External Signal

0 to +10VDC

+VRef. NOT USED

Terminate Safely.

+V Supply

 PTD voltage input (GREEN wire ) is internally pulled to

0V to prevent spurious operation with no command

signal connected.

 Ramps DO NOT work if power is dis-connected.

 Use 0-10V maximum command signal input.

 Ensure external command signal source is connected to

same GND (0V) as the PTD power supply for correct

operation.

 Ensure +VRef is terminated safely to avoid shorts.

 Always use screened wires wherever possible.

 PTD voltage input (GREEN wire ) is internally pulled to

0V to prevent spurious operation with no command

signal connected.

 Ramps DO NOT work if power is dis-connected.

 Use internal reference voltage +Vref for local control with

potentiometer or joystick e.t.c.

 HCT recommends 10KΩ potentiometers / joysticks.

 +Vref is protected and current limited to ~5mA.

 12VDC PTD’s have +8VRef output.

 24VDC PTD’s have +15VRef output.

 Always use screened wires wherever possible.

 PTD current input uses a 250Ω shunt resistor connected

to GND (0V) internally

 Yellow wire (-ImA) is internally connected to GND (0v)

supply

 4-20mA command is connected between +I and –I

 Ramps DO NOT work if power is dis-connected.

 Use 4-20mA maximum command signal input.

 Always use screened wires wherever possible.

FUSES:

For clarity, no fuses are shown here.

HCT strongly recommends that the user installs a fuse

holder that if fit for purpose in the application and uses a

correctly rated fuse for each plug top driver to ensure

that damage does not occur under short circuit or wiring

circumstances.

www.hctcontrols.com

1 2 3 4

Comentários a estes Manuais

Sem comentários

High-country-tek Plug Top Driver Series Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Software High-country-tek Plug Top Driver Series