High-country-tek DVC80 Manual do Utilizador descarregar pdf (Página 50)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 50

Digital Input

Name Description Range

Name

Set/Get the state of the switch False or Off, True or

Name.RealRPM The Unsigned Integer Value of the RPM. For Pulse

inputs Only

0 to 9999

Name.PulseTimeout Get/Set Pulse Timeout for Loss of Signal 0 to 65535

Name.PulsesPerRev Get/Set Pulses Per Revolution 0 to 9999

Name.Counter Get/Set Unsigned Integer Value of the Counter.

Pulse inputs Only

0 to 65535

Name.LOS Loss of Signal flag set after time out. For Pulse

inputs Only

False (Pulses ok),

True (No Pulse Input)

Universal and Analog Input

Name Description Range

Name

Get 0 to 100% regardless of direction 0% to 100%

(Min Volts to Center

Volts)

NameLo

Get 0 to 100% of Min to (Center - Deadband)

only if Center is enabled

0% to 100%

(Center Volts to Max

Volts)

NameHi

Get 0 to 100% of (Center + Deadband) to Max

only if Center is enabled

0% to 100%

Name.Dir Get the Upper or Lower Side of the Analog

Input only if Center is enabled.

Lower Side voltage is lower than the Upper

Side

False (Lower Side), True

(Upper Side)

Name.RawVolts Volts or mAmps (ma = universal input ma

select)

0 to 1023 * Scale

Name.RefVolts Reference Volts = RefVolts * .00489 0 to 1023

Name.RampVolts Ramped Volts = RampVolts * Scale Factor 0 to 1023 * Scale

Name.MinVolts When Name = 0% (i.e. Center not enabled) 0 to 1023 * Scale

Name.MaxVolts When Name = 100% 0 to 1023 * Scale

Name.MinLimit Threshold for Name.MinF 0 to 1023 * Scale

Name.MaxLimit Threshold for Name.MaxF 0 to 1023 * Scale

Name.RefMinLimit Threshold for Name.MinRF 0 to 1023 * Scale

Name.RefMaxLimit Threshold for Name.MaxRF 0 to 1023 * Scale

Name.CenterVolts Where Center Volts 0 to 1023 * Scale

Name.Deadbandv Plus and minus volts about CenterVolts 0 to 1023 * Scale

NameX.RampUp RampUp * .01 = Time Min to Max (Seconds) 0.0 to 65.00 s

NameX.RampDown RampDown * .01 = Time Max to Min (Seconds) 0.0 to 65.00 s

NameX Where NameX = NameLo, NameHi if Center is

enabled NameX = Name if Center is not

enabled

Name.MinF Status Flag set if Voltage is less than Min Limit False (ok), True (Outside

Limit)

Name.MaxF Status Flag set if Voltage is greater than Max

Limit

Range: False (ok), True

(Outside Limit)

Name.MinRF Status Flag set if Voltage is less than

Reference Min Limit

False (ok), True (Outside

Limit)

Name.MaxRF Status Flag set if Voltage is greater than

Reference Max Limit

False (ok), True (Outside

Limit)

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 169 170

Comentários a estes Manuais

Sem comentários

High-country-tek DVC80 Manual do Utilizador Página 50

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores High-country-tek DVC80